A Multiband Meanderline Rectenna: Design and Simulation for Enhanced Performance
Abstract
This research article presents design, simulation and analysis of a novel meanderline microstrip patch rectenna to harvest energy from the 2.4 GHz and 5.0 GHz frequency bands. The research is approached in two stages. In the first stage, a meanderline microstrip patch antenna offering improved bandwidth, radiation characteristics, and impedance matching is considered. The antenna is constructed on an FR4 substrate, with the radiating patch positioned between the substrate and a solid ground plane. A feedline strip is incorporated in the radiating patch to excite the antenna. The factors concerning the rectenna’s design and optimization process included meanderline geometry, substrate nature, and the nature and performance of electronic components. The performance of the proposed system is evaluated using Keysight Advanced Design System, taking into account metrics like return loss, radiation pattern, output voltage, and power harvesting efficiency. An impedance-matching network was designed and implemented in the simulation to avoid any power loss due to impedance mismatch between the antenna and the rectifier. A multiband rectifier is utilized to convert RF power into usable output DC voltage. The conventional diodes used in the rectifier have been replaced with HSMS 2850 Schottky diodes to further improve efficiency. In the simulation of the proposed rectenna, an overall bandwidth of 1.2 GHz was achieved, with a gain of 3.56 dBi at 2.40 GHz and 8.064 dBi at 5.02 GHz. The rectenna demonstrated an output voltage of 3.646 V at an input power level of 30 dBm and -2mV at -5 dBm input power level. A peak conversion efficiency of 83% was obtained for the overall system. The analysis of simulation results demonstrated an improved performance of the antenna in terms of increased bandwidth and enhanced power harvesting capabilities.
Keywords
Full Text:
PDFReferences
W. A. Khan, R. Raad, F. Tubbal, and G. Mansour, "Design of a compact antenna and rectifier for a dual band rectenna operating at 2.4 GHz and 5.8 GHz," in 2022 16th International Conference on Telecommunication Systems, Services, and Applications (TSSA), 2022, pp. 1-5: IEEE. DOI: 10.1109/TSSA56819.2022.10063929.
S.-E. Adami et al., "A flexible 2.45-GHz power harvesting wristband with net system output from− 24.3 dBm of RF power," IEEE Transactions on Microwave Theory Techniques vol. 66, no. 1, pp. 380-395, 2017. DOI: 10.1109/TMTT.2017.2700299.
N. M. Din, C. K. Chakrabarty, A. B. Ismail, K. K. A. Devi, and W.-Y. Chen, "Design of RF energy harvesting system for energizing low power devices," Progress In Electromagnetics Research vol. 132, pp. 49-69, 2012. DOI: 10.2528/PIER12072002
M.-J. Nie, X.-X. Yang, G.-N. Tan, and B. Han, "A compact 2.45-GHz broadband rectenna using grounded coplanar waveguide," IEEE antennas wireless propagation letters vol. 14, pp. 986-989, 2015. DOI: 10.1109/LAWP.2015.2388789.
C. Song, Y. Huang, J. Zhou, J. Zhang, S. Yuan, and P. Carter, "A high-efficiency broadband rectenna for ambient wireless energy harvesting," IEEE transactions on Antennas Propagation, vol. 63, no. 8, pp. 3486-3495, 2015. DOI: 10.1109/TAP.2015.2431719.
H. Takhedmit, L. Cirio, S. Bellal, D. Delcroix, and O. Picon, "Compact and efficient 2.45 GHz circularly polarised shorted ring-slot rectenna," Electronics letters vol. 48, no. 5, pp. 253-254, 2012. DOI: 10.1049/el.2011.3890.
M. Aboualalaa, I. Mansour, and R. K. Pokharel, "Energy Harvesting Rectenna Using High-gain Triple-band Antenna for Powering Internet-of-Things (IoT) Devices in a Smart Office," IEEE Transactions on Instrumentation Measurement 2023. DOI: 10.1109/TIM.2023.3238050.
S. Agrawal, M. S. Parihar, and P. N. Kondekar, "A dual-band rectenna using broadband DRA loaded with slot," International Journal of Microwave Wireless Technologies vol. 10, no. 1, pp. 59-66, 2018. DOI: 10.1017/S1759078717001234.
M. A. Al-Janabi and S. K. Kayhan, "Flexible vivaldi antenna based on a fractal design for RF-energy harvesting," Progress In Electromagnetics Research M, vol. 97, pp. 177-188, 2020. DOI: 10.2528/PIERM20073003.
K. Bhatt, S. Kumar, P. Kumar, and C. C. Tripathi, "Highly efficient 2.4 and 5.8 GHz dual-band rectenna for energy harvesting applications," IEEE Antennas Wireless Propagation Letters, vol. 18, no. 12, pp. 2637-2641, 2019. DOI: 10.1109/LAWP.2019.2946911.
Y. Chang, P. Zhang, and L. Wang, "Highly efficient differential rectenna for RF energy harvesting," Microwave Optical Technology Letters vol. 61, no. 12, pp. 2662-2668, 2019. DOI: 10.1002/mop.31945.
M. C. Derbal and M. Nedil, "A high gain dual band rectenna for RF energy harvesting applications," Progress In Electromagnetics Research Letters vol. 90, pp. 29-36, 2020. DOI: 10.2528/PIERL19122604.
S. Divakaran and D. Krishna, "Dual-band multi-port rectenna for
RF energy harvesting," Progress In Electromagnetics Research C vol. 107, pp. 17-31, 2021. DOI: 10.2528/PIERC20100802.
S. Chandravanshi and M. Akhtar, "An efficient dual‐band rectenna using symmetrical rectifying circuit and slotted monopole antenna array," International Journal of RF Microwave Computer‐Aided Engineering vol. 30, no. 4, p. e22117, 2020. DOI: 10.1002/mmce.22117.
S. Chandravanshi, S. S. Sarma, and M. J. Akhtar, "Design of triple band differential rectenna for RF energy harvesting," IEEE Transactions on Antennas Propagation, vol. 66, no. 6, pp. 2716-2726, 2018. DOI: 10.1109/TAP.2018.2819699.
D. Colaiuda, I. Ulisse, and G. Ferri, "Rectifiers’ design and optimization for a dual-channel RF energy harvester," Journal of Low Power Electronics Applications vol. 10, no. 2, p. 11, 2020. DOI: 10.3390/jlpea10020011.
A. Karampatea and K. Siakavara, "Synthesis of rectenna for powering micro-watt sensors by harvesting ambient RF signals’ power," Electronics vol. 8, no. 10, p. 1108, 2019. DOI: 10.3390/electronics8101108.
N. Kashyap and D. Singh, "A Novel Circularly Polarized Annular Slotted Multiband Rectenna for Low Power Sensor Applications," Progress In Electromagnetics Research B vol. 99, pp. 103-119, 2023. DOI: 10.2528/PIERB22122606.
H. H. Ibrahim, M. S. Singh, S. S. Al-Bawri, and M. T. Islam, "Synthesis, characterization and development of energy harvesting techniques incorporated with antennas: A review study," Sensors, vol. 20, no. 10, p. 2772, 2020. DOI: 10.3390/s20102772.
S. Ullah, C. Ruan, M. S. Sadiq, T. U. Haq, A. K. Fahad, and W. He, "Super wide band, defected ground structure (DGS), and stepped meander line antenna for WLAN/ISM/WiMAX/UWB and other wireless communication applications," Sensors, vol. 20, no. 6, p. 1735, 2020.
DOI: 10.3390/s20061735.
S. Muhammad, J. J. Tiang, S. K. Wong, A. Smida, M. I. Waly, and A. Iqbal, "Efficient quad-band RF energy harvesting rectifier for wireless power communications," AEU-International Journal of Electronics Communications vol. 139, p. 153927, 2021. DOI: 10.1016/j.aeue.2021.153927.
P. V. Naidu, A. Kumar, and R. Rajkumar, "Design, analysis and fabrication of compact dual band uniplanar meandered ACS fed antenna for 2.5/5 GHz applications," Microsystem Technologies vol. 25, pp. 97-104, 2019. DOI: 10.1007/s00542-018-3937-8.
A. Okba, A. Takacs, H. Aubert, S. Charlot, and P.-F. Calmon, "Multiband rectenna for microwave applications," Comptes Rendus Physique vol. 18, no. 2, pp. 107-117, 2017. DOI: 10.1016/j.crhy.2016.12.002.
N. Othman, N. Samsuri, M. Rahim, K. Kamardin, and H. Majid, "Meander bowtie antenna for wearable application," TELKOMNIKA vol. 16, no. 4, pp. 1522-1526, 2018. DOI: 10.12928/telkomnika.v16i4.9061.
R. Pandey, A. K. Shankhwar, and A. Singh, "An improved conversion efficiency of 1.975 to 4.744 GHz rectenna for wireless sensor applications," Progress In Electromagnetics Research C, vol. 109, pp. 217-225, 2021. DOI: 10.2528/PIERC20121102.
Y. Shi, Y. Fan, Y. Li, L. Yang, and M. Wang, "An efficient broadband slotted rectenna for wireless power transfer at LTE band," IEEE transactions on Antennas Propagation vol. 67, no. 2, pp. 814-822, 2018. DOI: 10.1109/TAP.2018.2882632.
B. V. S. Suwan, W. W. G. Vidula, W. Wanniarachchi, C. H. Manathunga, and S. Jayawardhana, "The Design and Implementation of an RF Energy Harvesting System Using Dynamic Pi-Matching, Enabling Low-Power Device Activation and Energy Storage," Progress In Electromagnetics Research C, vol. 119, 2022. DOI: doi:10.2528/PIERC21121802.
D. Vital, S. Bhardwaj, and J. L. Volakis, "Textile-based large area RF-power harvesting system for wearable applications," IEEE Transactions on Antennas Propagation vol. 68, no. 3, pp. 2323-2331, 2019. DOI: 10.1109/TAP.2019.2948521.
F. Zanon, U. Resende, G. Brandao, and I. Soares, "Energy Harvesting System Using Rectenna Applied to Wireless Powered Remote Temperature Sensing," Progress In Electromagnetics Research C, vol. 114, pp. 203-217, 2021. DOI: 10.2528/PIERC21060901.
K. Shafique et al., "Energy harvesting using a low-cost rectenna for Internet of Things (IoT) applications," IEEE access vol. 6, pp. 30932-30941, 2018. DOI: 10.1109/ACCESS.2018.2834392.
H. H. R. Sherazi, D. Zorbas, and B. O’Flynn, "A comprehensive
survey on RF energy harvesting: Applications and performance determinants," Sensors vol. 22, no. 8, p. 2990, 2022. DOI: 10.3390/s22082990.
K. Çelik and E. Kurt, "A novel meander line integrated E‐shaped rectenna for energy harvesting applications," International Journal of RF Microwave Computer‐Aided Engineering vol. 29, no. 1, p. e21627, 2019. DOI: 10.1002/mmce.21627.
M. Koohestani, J. Tissier, and M. Latrach, "A miniaturized printed rectenna for wireless RF energy harvesting around 2.45 GHz," AEU-International Journal of Electronics Communications vol. 127, p. 153478, 2020.
M. Mathur, A. Agrawal, G. Singh, and S. K. J. P. I. E. R. M. Bhatnagar, "A compact coplanar waveguide fed wideband monopole antenna for RF energy harvesting applications," Progress In Electromagnetics Research M vol. 63, pp. 175-184, 2018. DOI: 10.2528/PIERM17101201.
DOI: https://doi.org/10.33180/InfMIDEM2024.203
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Vishnu Raghuthaman Nedungadi, Vidhyapriya Ranganathan
This work is licensed under a Creative Commons Attribution 4.0 International License.