Dual-Mode Sinusoidal Quadrature Oscillator with Single CCCTA and Grounded Capacitors

Worapong Tangsrirat

Abstract


In this work, a sinusoidal quadrature oscillator which simultaneously generates voltage and current signal outputs is proposed.  It contains only a single current-controlled conveyor transconductance amplifier (CCCTA) and two grounded capacitors.  The proposed oscillator has the advantage features of resistorless structure realization, electronic frequency control, availability of two explicit voltage and current quadrature outputs, and low sensitivity figure.  Moreover, the parasitic elements existing at the CCCTA terminals are taken into account.  The performance of the proposed oscillator circuit was verified using PSPICE simulation with acceptable results.

Keywords


Current-Controlled Conveyor Transconductance Amplifier (CCCTA); Quadrature Oscillator; Resistorless circuits; Voltage-mode and current-mode circuits.

Full Text:

PDF

References


A. U. Keskin, D. Biolek, “Current-mode quadrature oscillator using current differencing transconductance amplifiers (CDTA)”, IEE Proc. Circuits Devices Syst., vol.153, no.3, pp.214-218, 2006.

A. Lahiri, “New current-output quadrature oscillator using CDTA”, IEICE Electronics Express, vol.6, no.3, pp.135-140, 2009.

W. Tangsrirat, W. Tanjaroen, “Current-mode sinusoidal quadrature oscillator with independent control of oscillation frequency and condition using CDTAs”, Indian J. Pure App. Phys., vol.48, pp.363-366, 2010.

S. Maheshwariang, B. Chaturvedi, “High output impedance CMQOs using DVCCs and grounded components”, Int. J. Circ. Theor. Appl., vol.39, pp.427-435, 2011.

N. Minhaj, “Current conveyor-based voltage-mode two-phase and four-phase quadrature oscillator”, Int. J. Electron., vol.94, no.6-8, pp.663-669, 2007.

W. Tangsrirat, S. Pisitchalermpong, “CDBA-based quadrature sinusoidal oscillator”, Frequenz, vol.61, no.3-4, pp.102-104, 2007.

W. Tangsrirat, D. Prasertsom, T. Piyatat, W. Surakampontorn, “Single-resistance-controlled quadrature oscillator using current differencing buffered amplifiers”, Int. J. Electron., vol.95, no.11, pp.1119-1126, 2008.

W. Tangsrirat, T. Pukkalanun, W. Surakampontorn, “CDBA-based universal biquad filter and quadrature oscillator”, Active Passive Electron. Comp., vol.2008, Article ID 24717, 6 pages, doi : 10.1155/2008/247171, 2008.

S. Maheshwariang, J. Mohan, D. S. Chauhan, “High input impedance voltage-mode universal filter and quadrature oscillator”, J. Circuits Syst. Comput., vol.19, no.7, pp.1597-1607, 2010.

N. Herencsar, K. Vrba, J. Koton, A. Lahiri, “Realisations of single-resistance-controlled quadrature oscillator using a generalized current follower transconductance amplifier and a unity-gain voltage-follower”, Int. J. Electron., vol.97, no.8, pp.897-906, 2010.

S. Maheshwariang, I. A. Khan, “Novel single resistance controlled quadrature oscillator using two CDBAs”, J. Active Passive Electron. Devices, vol.2, pp.137-142, 2007.

A. Lahiri, “Novel voltage/current-output quadrature oscillator using current differencing transconductance amplifier”, Analog Integr. Circ. Sig. Process., vol.61, no.2, pp.199-203, 2009.

A. Lahiri, “Explicit-current-output quadrature oscillator using second-generation current conveyor transconductance amplifier”, Radioengineering, vol.18, no.4, pp.522-526, 2009.

J. W. Horng, C. L. Hou, C. M. Chang, H. P. Chou, C. T Lin, Y. H. Wen, “Quadrature oscillator with grounded capacitors and resistors using FDCCIIs”, ETRI Journal, vol.28, no.4, pp.486-494, 2006.

W. Jaikla, M. Siripruchyanun, J. Bajer, D. Biolek, “A simple current-mode quadrature oscillator using single CDTA”, Radioengineering, vol.17, no.4, pp.33-40, 2008.

J. Jin, C. Wang, “Single CDTA-based current-mode quadrature oscillator”, Int. J. Electron. Commun. (AEU), vol.66, pp.933-936, 2012.

M. Siripruchyanun, W. Jaikla, “Current controlled current conveyor transconductance amplifier (CCCCTA): a building block for analog signal processing”, Electrical Engineering, vol. 90, no. 6, pp. 443-453, 2008.

R. Prokop, V. Musil, “New modern circuit block CCTA and some its applications”, Proceedings of the Fourteenth International Scientific and Applied Science Conference-Electronics (ET-2005), Book 5, Sofia, pp.93-98, 2005.

R. Sotner, J. Jerabek, R. Prokop, K. Vrba, “Current gain controlled CCTA and its application in quadrature oscillator and direct frequency modulator”, Radioengineering, vol.20, no.1, pp.317-326, 2011.

W. Jaikla, A. Noppakarn, S. Lawanwisut, “New gain controllable resistor-less current-mode first order allpass filter and its application”, Radioengineering, vol.21, no.1, pp.312-316, 2012.

W. Jaikla, S. Siripongdee, P. Suwanjan, “MISO current-mode biquad filter with independent control of pole frequency and quality factor”, Radioengineering, vol.21, no.3, pp.886-891, 2012,

W. Tangsrirat, “Simple BiCMOS CCCTA design and resistorless analog function realization”, The Scientific World Journal, vol. 2014, Article ID 423979, 7 pages, http://dx.doi.org/10.1155/2014/423979, 2014.

R. C. Dorf, R. H. Bishop, Modern Control Systems, 11th-edition, New Jersey, Pearson prentice Hall, 2008.

S. S. Gupta, R. Senani, “State variable synthesis of single resistance controlled grounded capacitor oscillator using only two CFOAs”, IEE Proc. Circuits Devices Syst., vol.145, pp.135-138, 1998.

D. R. Bhaskar, R. Senani, “New current-conveyor-based single-resistance-controlled/voltage-controlled oscillator employing grounded capacitors”, Electron. Lett., vol.29, no.7 , pp.612-614, 1993.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Informacije MIDEM